|
MOUNTING COMPONENTS
This section describes the required kits or components for installation
as well as some optional parts for that may be helpful for the mounting
of your solar pool heating system.
 1)
Collector Installation Kit contains the parts needed
to fasten a single solar collector panel to a supporting surface and to
make water connections from one collector to another. Our Complete Systems
includes one of these kits for each collector panel in the system. Hold-down
strapping is not a part of this kit, but sufficient strapping is included
with any of our Complete Systems or can be ordered separately. Use one
kit per collector.
| 1 |
Outlet header hold-down bracket assembly |
| 2 |
Hold-down strap bracket |
| 2 |
Collector connector hose (3 3/4" long) |
| 4 |
Hose clamp, stainless steel |
 2)
System Kit contains additional hold-down hardware, connection
parts and adapters needed to complete water connections from the collectors
to the system feed and return line. The pipe adapters that connect the
system piping to the collectors are high temperature CPVC. The system
check valve is PVC. Installation and homeowner manuals are also included.
One kit is included with each Complete System.
| 1 |
Vacuum Relief Valve |
| 1 |
Outlet header hold-down bracket assembly |
| 4 |
Hold-down strap clamp assembly |
| 1 |
End cap |
| 2 |
Pipe adapter |
| 2 |
Hold-down strap bracket |
| 2 |
System connector hose (7" long) |
| 4 |
Hose clamp, stainless steel |
| 1 |
Check Valve |
| 1 |
Installation Manual |
| 1 |
Owner's Manual |
Isolation Kit (not pictured). This is a recommended option to
your system. It includes a PVC union ball valve and a PVC check valve
to permit the manual isolation of the solar system from the pool or spa
filtration system. Use one kit per system.
|
