|
 Hold-Down
Strap is required to secure collectors to the mounting surface. Use
the small strap coil (54’) for rows of up to 6 collectors wide or
the large coil (107’) for rows of up to 12 collectors.
 Add-A-Row
Kit is used when more than one row of collectors is to be installed.
Use one kit for each collector row added after the first.
| 1 |
Vacuum Relief Valve |
| 1 |
Outlet header hold-down bracket assembly |
| 4 |
Hold-down strap clamp assembly |
| 1 |
End cap |
| 2 |
Pipe adapter |
| 2 |
Hold-down strap bracket |
| 2 |
System connector hose (7” long) |
| 4 |
Hose clamp, stainless steel |
 Row
Spacer Kit is used when a row of collectors must be interrupted by
a space to allow for obstructions such as a chimney or roof vent. It contains
the hardware needed to space around any width obstructions by connecting
appropriate lengths of PVC pipe to the pipe adapters at the inlet and
outlet headers of the two collectors on either side of the obstructions.
Use when required.
| 1 |
Outlet header hold-down bracket assembly |
| 4 |
Hold-down strap clamp assembly |
| 4 |
Pipe adapter |
| 2 |
Hold-down strap bracket |
| 2 |
Collector connector hose (3 3/4” long) |
| 4 |
Hose clamp, stainless steel |
 Double
Hole Outlet Header Bracket may be used on steep roof applications
or in high wind areas where extra strap hold-down strength is required.
 Aluminum
Header Bracket is used as optional outlet header mounting hardware.
It replaces or can be used in conjunction with the Outlet Header Hold-Down
Bracket assembly. The bracket is designed for installations that require
more flexibility for the outlet header mounting hardware location, such
as barrel tile roofs or installations that require mounting hardware to
be anchored into rafters or beams.
|
